DMC
Home
About Us
Contact Us
Flyers
LOGIN
Part Number: 252Z-14 / Vendor ID #: 1152301
HEIGHT TRANSFER GAGE, 14"
by LS Starrett
Call for Price
Availability
  • Manufacturer availability unknown.
Dimensions
Info & Guides
Specific Products: 252Z-14
Product Overview
Height Transfer Gage, 0 - 14"/0 - 350mm Range
HEIGHT TRANSFER GAGE, 14"
Category Path
Category:
Testing, Measuring and Inspection
Subcategory:
Height Measurement Tools
Subtype:
Dial Height Gages
Product Specs
Cal Prop 65 Chemical:
View
Cal Prop 65 Statement:
View
Cal Prop 65 Warning:
View
Description:
The Starrett 252 Height Transfer Gage is ideal for use with test indicators or electronic
EAN:
0049659558906
EDP:
55890
Electronic or Mechanical:
Mechanical
Max. Range (in):
14
Max. Range (mm):
350
Min. Range (in):
0
Min. Range (mm):
0
Product Title:
252Z-14 Height Transfer Gage
Range (in):
0-14"
Range (mm):
0-350mm
Type:
Height Transfer Gage
Unit Pack Height (in):
23.6
Unit Pack Item Qty:
1
Unit Pack Length (in):
12.8
Unit Pack Weight (lbs):
19
Unit Pack Width (in):
7.3
Web Priority-US-EN:
41400005
A snug on the slide provides two holes (.375" [9.5mm] and .156" [4mm]) for holding gage rods or scribers
Adjustable slide, incorporating a snug for holding test indicators or electronic gage heads, has rapid vertical manual adjustment
Adjusting mechanism is located in the base so the column and indicator are isolated and not affected by external factors, i.e. heat or hand pressure
Bottom of the base has three ground and lapped pads for stability and smooth movement on the surface plate
Extreme rigidity provides the vibration proof stability necessary to permit precise, repeat readings with indicators of the highest amplification
Extremely rigid, rectangular box-type hollow column mounted integrally on a heavy base
Hand-fitting base design for sure-grip handling and easy movement
Knob on base allows fine vertical adjustment of the slide unit relative to the fixed column
Starrett 25, 81, 655 and 656 Series Dial Indicators also can be used on the height gage by means of a PT06784-A Gage Rod
The rod has a major diameter of .375" (9.5mm) and stepped diameters of 1/4" (3.2mm) and 7/32" (5.5mm) at one end and 5/16" (8mm) at the opposite end.
Thumb screw allows slide to be locked
Manufacturer Info
Manufactured By:
LS Starrett
To: From: Subject:
Copyright 2023 DMC Associates. ALL Rights Reserved.